Balboa BP100 Bundle with 5.5KW heater and the 4 button TP200T topside control panel. This compact basic control system is ideal to retrofit in smaller hot tubs with 1 or 2 pumps. Can run on 120 volts for single pump applications (configuration required) Smoothly integrates with bwa, ControlMySpa, bba. The BP100/200 works with all of Balboa's TP and SpaTouch Panels.

NOTE: This control should be installed by a technician experienced with Balboa programming and setup

Features:

• 15.0" Long Heater, and Topside 4.35 x 1.58" drops into a cutout 3-3/4 x 1"
• BP capable features, TP200T topside with filler plate, 85 inch long cable. Plate is 8.5 x 3.5"
• Balboa ControlMySpa wifi compatible (Sold Separately)
  
• Works with the newest TP/SpaTouch Panels

*The Balboa BP100 is factory configured for 240 volt applications, pump(s) and ozonator must be 240 volts.

Can be configured for 120 volt but pumps and ozonator must all be 120 volts.

*Pump 1, Circ Pump and Ozone must be the same voltage

*If installing a 24 hour circulation pump, it must have no less than a 23 GPM flow. Laing, Grundfos or Waterway Tiny Might pumps do not perform at this rate and cannot be used.

Balboa BP100 Control System with Heater and TP200T Panel.

Does not include pump or blower power cords. Cords available here:

Pump Power Cord

Single Speed Cord for Pump or Blower

A replacement for older Balboa controls including VS100, VS300, VS500Z, VS501Z, VS501SZ, VS503SZ, VS504SZ, and BP501G1

FEATURES:

• Lowest cost entry level BP System
• Works with all of Balboa’s TP Panels
• Works with all of Balboa’s SpaTouch™ Panels
• Compact size with removable feet
• Built with premium materials, the attached spa heater is engineered for easy installation without any loose wires. All in one convenient package
• The system can be mounted with feet or brackets (metal brackets are sold separately. P/N #32068)