This Baptistry Heater 1500LF Low Flow system is intended for those plumbing applications where the
existing piping is small, 1-1/4" or 1" pipe. This unit comes with 1-1/2" fittings and it is
up to the plumber on the job to reduce down to 1-1/4" or 1" with any needed fittings.
This heater is different in that it has a very long 4.0kw element inside meant for lower
flow rates.
Baptistry Heater 1500LF includes:
SMTD1500 ePack Low Flow control with heater (1)
1 speed 1725 RPM Circulation pump (1)
400-4060 pump unions UN-P15 (2)
741-CGGG-45X pump power cord 4-wire (1)
411-4040 St Ell 45 1-1/2" SpgxS (1)
411-5550 Ell 90 1-1/2" SpgxSpg (1)
421-4070 Reducer Bushings 2" to 1.5" (2)
Baptistry Heater System 1500LF 4.0kW, Complete with pump, heater, and control, 230 volt or 115 volt, 4000 watts or 1000 watts, ETL Listed for continuous use in pools & tubs, silent running 1725 RPM Circulation pump, 4.0kw heater with time, and temperature control, programmable, convertible system, 115 volt or 230 volts, shown with 1-1/2" plumbing fittings. Baptismal heating system. On 115 volts heater is 1.0kW.
If you need a 3-wire all 230v or 208v with no neutral, add this option to your order, p/n: ACC3WIRECONVERSION
Unlike typical industrial immersion heaters, which are not Listed for use in water with people, this heater is extensively tested and Listed for use with people in tubs & pools. This Circ pump is very low amp draw, the fittings provided allow easy connection of pump to heater. A very reliable system, the SmarTouch Digital Control has been used for years in the spa industry and has a great reputation for reliability. It is far superior to so called baptistry heaters cobbled together using heaters from the chrome plating industry.
-1.6The heater and control are warranted by ACC. The system is very flexible and easy to program, can be set to a temperature and programmed to run certain hours, or economy mode, etc. using the digital display keypad.
Overall height about 14"
Run on 230 volts, this would draw about 18.2 amps and belongs on a 4-wire circuit with a neutral, on 30a GFCI breaker. On 115v it would draw only 10.3 amps and belongs on a 15 or 20a GFCI breaker. Other options include hair & lint trap, cartridge filter, larger pumps available too. Also, a WiFi remote is available.
This unit is not designed to LIFT water out of a pool, this requires a pool pump with integral leaf trap/basket. Please email us if you need this feature, we will recommend a higher speed pump for you. The above included Iron Might pump is excellent for water circulation, heating, and filtration. If you need a pump to drive water flow to a fountain or a long distance, or lift out of a pool of water below the level of the pump, email us the details and we will help with pump selection. If you need a plastic base, email us please. It is an extra cost item, about $25 and we do need an email requesting it beforehand.
Includes:
-Heater with controller
-Digital keypad/display
-Power cord set
-Pump
-Fittings for pvc piping connection
Specifications:
-230 volts 4-wire 30 amps or 115 volts 15 amps operation.
-heater specs 240/115v 4000 watts/1000 watts
-pump specs 1725 RPM
-plumbing size 1-1/2" pvc schedule 40.
-rough in dimensions 26L x 16W x 13"T
-topside keypad/display 2.50 x 5.50" (for flush mount, drops into 1.9x4.9" cutout)
-weight approx 33 lbs total.
-elevation, to be mounted below water level, for priming.
-weather resistance, this is indoor rated not for outdoor use.
Baptistry Heater System, Baptismal Heating System, Baptistry heater, baptistry pump, baptistry, baptistery heater, baptistery system, baptistery pump, baptistery, baptistry heater parts, baptistry heater systems, baptistry heater pump, baptistry heater and pump, baptistry heater element, baptistry heater installation, baptistry heater filter
