 |
CS6009-US2 Spa Control Pneumatic 115/230v with moveable Heater 5.5kw, runs a main 2 speed pump, and air blower on-off, a second single speed jet pump, a light, and an ozonator. Heater can be positioned under the control, behind it, or even located off of the control box.
Has a built in time clock, and thermostat control knob. Easy to install and service, includes installation kit, owner's manual and has 1 year warranty from Hydro-Quip. Unit has a plug in port for an optional Spaside control pad. See accessories listed below.
60" cord on the heater. With 48" components cords, air buttons, air tubing, 2" pvc couplings. 15" heater. About 11" tall, 5" deep, 15" wide. The CS Series are a nice alternative to the electronic spa controls in that they are simple to install, operate, and service.
The CS6009-US2 is usually in stock,
Ideal to refurbish your portable spa, for Cal Spa, Brett Aqualine, Baja Spas, Coleman Spas, Caldera Spas, Vita Spas, Emerald Spas, Hot Spring Spas, Arctic Spas, Hawkeye Spas, Catalina Spas, Sundance Spas, LA Spas, Artesian Spas, Morgan Spas, Leisure Bay, Rec Warehouse, Pinnacle, Hurricane, Aquatemp, Nu-Wave, CRL, and many others. Z2EFD7L-95004EK
Factory Default Voltages are:
-Incoming 230v 4-wire with neutral
-Heater is 230v
-Main 2-speed pump is 115v (you can change this to 230v)
-Air Blower is 115v
-Ozonator is 115v
-Light is 12v
-Pump 2 is 1 speed only, 115v and can be changed to 230v
Also there is a 1 pump model p/n CS6009-US1 available.
|
|
|