P115EX22012, 36675, Wavemaster 7000, Watkins 36675, Hot Springs 36675, Wavemaster 6000, 06016158

Pump replacement for old p/n 36675 Spa Pump for Watkins Hot Spring Spa, if run only on 115V, rated 15.4 amps, 1-speed 2"SD/CS.

PLEASE SPECIFY IN THE ORDER COMMENTS BOX IF YOU HAVE 1 BIG JET PUMP IN YOUR TUB,

OR, YOU HAVE 2 OR 3 BIG JET PUMPS. IT MAKES A DIFFERENCE IN WHAT MOTOR IS SHIPPED

WITH YOUR ORDER. YOUR ORDER WILL NOT SHIP WITHOUT HAVING THIS INFORMATION PLEASE NOTE.

Runs on 115 volts only, for old Hot Springs Spas by Watkins Manufacturing, replacement for old Wavemaster 7000, models 36675, 36675-03, Wavemaster 6000, 39577-02, 36745, 0974101, 06016158, 06016158-1, 5kcp39sn4335x and others, see photo for the style of this version of the 7000, as there is more than 1 style that uses the term 'Wavemaster 7000'. Or Wavemaster 6000. Or Wavemaster 5000 36745. Also this model is a very good replacement for the old discontinued Energy-Rite model 48WUA0753C-i

And if you run your motor by putting 230v to it, look at p/n P120EX21224. P120EX21224

Replacement for old Watkins/Hot Springs pumps, marked Wavemaster 7000 on at least 5 different pumps, be aware of this. Part number 36675 has been used over the years on several different styles of pump heads from different manufacturers. Look closely at the photos of the style you are choosing before you order and if you have any doubts about which style to order send us a photo of your pump head and we can confirm. "36745" or "36675" or "Wavemaster 7000" is NOT enough to define you old pump or find the proper
replacement, please note!

Order optional union fitting seals here: Gaskets and O-Rings

This pump has one (1) drain plug in place. The other 2 drain plug bosses are not drilled out and tapped, please note. For most applications this is perfect. If you must connect 2 drain hoses to the front using the optional barbed fitting (p/n 672-4350), then you can use a 3/8x3/8x3/8" barbed connector, either a WYE or TEE, from your local plumbing supplier. Most applications that have a drain tube connected to the front of the pump have only 1 tube. 2 or 3 tubes is fairly uncommon.

Overall length 15-9/16" and overall height to the top of the discharge port 7-3/4".
Insulation Class B. Service Factor 1.00 Amp Draw on 115v is 15.4A
Threaded Intake & Discharge measure 3.07" outside diameter (normal for use with 2 inch pvc pipe size).
This model P115EX22012 comes preset to run on 115 volts.