PUULC2102582FXL Spa Pump MP-100 Marquis, MP100, 630-6073, mrq630-6073

PUULC2102582FXL PUULC2102582F Spa Pump replacement 1.0 HP 230 Volt 8.4A Two Speed 2"SD/CS, replaces Marquis Spa Pump MP-100, MP100, a Marquis Pump, Motor was a GE 2353, or 5kc49nn2386x, this model is a 5.6" diameter motor.

Replaces p/n 1014197, 10-14-197. Original old 56 frame GE motor was 6.5 amps and 6.5A.

Questions? email us at [email protected]

Threaded connections are 3-1/6" outside diameter, for 2" PVC pipe size. Outlet is approximately 7-5/16" from floor, and center of inlet is 3-1/2" from floor. This is a high performance 5.6" diameter 48 frame motor, that replaces the old 6.5" diameter GE motor. Overall length is 15-3/8". Note if you need a very short length of less than 15 inches, choose short PUUL2102582F

Motor has NEMA industry standard mounting base under it, whereas the old G.E. motor had a non-standard base under it. The difference in the bases means sometimes old mounting screws should be removed to allow the new motor to slide into place. Pump head is identical to original, same connections, and water flow and pressure and is a great replacement pump. MRQ630-6073.

These are new Ultra Jet® pump components assembled on new high quality U.S. Motors or AO Smith/Century motors, and are replacement pumps compatible with Balboa Water Group ® Ultra Jet^®Pumps.

	PUUPC2152582F pump 230v 2-spd 1015103 Marquis 630-6101 mp-130 mp130 8-9a 3.1" threads 14.9" OAL $372.00