PUULC2102582F Spa Pump MP-100 Marquis, MP100, 630-6073, mrq630-6073, 1054197

PUULC2102582F Spa Pump replacement 1.0 HP 230 Volt 6.5-9.0A Two Speed 2"SD/CS, Marquis Spa Pump MP-100, MP100, a Marquis Pump 630-6073, Motor was a GE 2353, or 5kc49nn2386x, or 5KC49NN2353AX, 1054197, a 6.5" diameter motor. maximum overall length 14.6". 1014197, 10-14-197.

Choose the model if your overall length must be kept as short as possible. Use p/n PUUL2102582F if length is not critical as it has a big 56 frame motor. Original old 56 frame GE motor was 6.5 amps. Now is 9.0A.

Overall motor length is 9.5" motor only. Threaded connections are 3-1/6" outside diameter, for 2" PVC pipe size. Outlet is approximately 7-5/16" from floor, and center of inlet is 3-1/2" from floor.

With new standard 4 slot base.

Motor has NEMA industry standard mounting base under it, whereas the old G.E. motor had a non-standard 6 slot base under it. The difference in the bases means sometimes old mounting screws should be removed to allow the new motor to slide into place. Pump head is identical to original, same connections, and water flow and pressure and is a great replacement pump. MRQ630-6073.

These are new Ultra Jet® pump components assembled on new high quality U.S. Motors or AO Smith/Century motors, and are replacement pumps compatible with Balboa Water Group ® Ultra Jet^®Pumps.