Pump replacement for PUUMC165258 Spa Pump for Watkins Hot Springs Spas 115/230V 1-spd Wavemaster 7000, 36675

PUUMC165258 Pump replacement for old p/n 36675 Watkins Hot Spring Spa pumps 115/230V 1-speed 2"SD/CS. Ultimax style.

PLEASE SPECIFY IN THE ORDER COMMENTS BOX IF YOU HAVE 1 BIG JET PUMP IN YOUR TUB,

OR, YOU HAVE 2 OR 3 BIG JET PUMPS. IT MAKES A DIFFERENCE IN HOW THE MOTOR IS SET UP

ON YOUR ORDER.

The old original motor was changeable voltage, run on 230 volts or 115 volts, for Hot Springs Spas by Watkins Manufacturing, replacement for Wavemaster 7000, models 36675 and others, see fifth photo for both styles, there is the PUUM style and the EX2 style, choose what matches your old pump and if you are not sure send us a few photos of your old one.

Dual voltage motor rated 16/8 amps, ships from factory set to 230 volts, can be changed to 115 volt operation, see motor label for wire change, and use your original dedicated power cord.

1016171. Replacement for Wavemaster pumps made by Ultra Jet ®. 17-1/4" overall length. If you have an exhaust hose on the rear of your old motor, use it again on the new motor, it is important to remove the hot air, especially in hot weather.

This pump is ideal if you run your motor on 230 volts. If you run your motor on 115 volts, take a look at p/n PUUMC15258 rated 15 amps on 115v, ideal for 115 volt applications. The p/n PUUMC15258 is the best choice if you run on 115V

IF YOU RUN YOUR PUMP ON 115 VOLTS PLEASE INFORM US. You can leave remarks in the order comments box. If you do not specify we will ask you your desired voltage setting. If no reply we will ship it set to the default 230v setting.

Also available in Waterway EX2, the replacement for the Aqua-Flo made Wavemasters, see fifth photo.

Watkins/Hot Springs used Wavemaster 7000 label on at least 6 different pumps, be aware of this. Part number 36675 has been used over the years on several different styles of pump heads from different manufacturers. Look closely at the photos of the style you are choosing before you order and if you have any doubts about which style to order send us a photo of your pump head and we can confirm. "36675" or "Wavemaster 7000" is NOT enough to define you old pump or find the proper replacement, please note!

If you want the XP2/EX2, order p/n P115EX22012

The factory ships these set for 230 volts. If you need to change it to 115v, see the motor label diagram for how it should look set for 230v and for 115v.

Order optional union fitting seals listed below under Accessories for this product.

These are new Ultra Jet® pump components assembled on new high quality US Motors or AO Smith/Century motors, and are replacement pumps compatible with Balboa Water Group® Ultra Jet® Pumps.