SMTD-1500-FM Floor Mounted ePack, no heater by ACC, Applied Computer Controls

ACC ePack SMTD-1500-FM Spa Control, by Applied Computer Controls. Floor mounted without heater. Includes cables and topside.

Designed to be used with your existing low flow 4.0kw heater. Includes circ pump cord. Not compatible with 6.0 kW heaters.

Info & Specifications

The ePack controls a 2 speed primary pump, a single speed air blower or a single speed secondary pump, an optional circulation pump, a 12 volt spa light, and an ozonator. This system is convertible and may be run on 120 volts.

NAME	MODEL #	PUMP 1	AIR BLOWER OR PUMP 2	LIGHT	HEATER	CIRCULATION PUMP	POWER	AMPERAGE
ePack	SMTD-1500-FM	1 or 2 Speed 120V/240V	1 Speed 120V/240V	12VAC	4KW Not included	240V / 120 V	240V / 120 V	41A / 24A 16A

Factory set default voltages are incoming 4-wire 230v, heater 230v, jet pump 115v, circ pump 115v, blower & ozonator 115v, light 12v

The temperature sensors are Hot Springs compatible, the installer can connect the HS sensors directly to this pack, and ACC supplies sensor adapters on a 2” harness to connect the ACC board to the HS sensor connectors (Temp and Hi Limit). This is helpful when replacing the wall mounted pack only but not the HS heater by keeping the same plumbing / circ pump and sensors.

No Heater, this unit is designed to use your existing 4kw heater. Floor mounted. Not compatible with 6kW heaters.

ePack User's Manual

A very compact 12 x 10.5 x 2.75"