Home > SOFTUB PUMPS >

Softub Pump PUUF1003 1013005 12.0A 115V 1-spd, a pump made for Soft Tub - now with metal base 12A US Motors -AIR COOLED MOTOR!
Softub Pump PUUF1003 1013005 12.0A 115V 1-spd, a pump made for Soft Tub
 
Price: $399.00
Sale Price: $299.00


Availability:: In Stock
Product Code: PUUF1003WB

Description
 
PUUF1003 1013005 12.0A 115V 1-spd, a pump made for Soft Tub, horizontal inlet and outlet for hose and clamp connection, has ports for heater coil, and for thermostat probe. - now with metal base 12A US Motors. original motors with no base have become somewhat unavailable.

This type with base may be used with a plastic heat transfer jacket, but is not as efficient as the old original SS coils from Softub. therefore, since this is an air cooled motor, it MUST have vents provided for cooling or it will not work and will damage this motor. No warranty if run without air vents!

Air vents can be cut near the front and rear of the motor location through the Softub pump container, then decorative covers such as a shower drain cover from Home Depot can be used, according to many creative customers who have modified their Softubs to us an air cooled motor.

This motor will be damaged if you run it without air vents! It will shut itself off if it gets too hot. Many Softub owners have used these air cooled motors with good ventilation and air flow provided, and been happy. But it will not work without at minimum two 4 inch holes, one near the front of the motor and one near the rear of the motor. If you do not want to make vent holes, do not purchase this motor, get a water cooled motor from Softub.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

SOFTUB PUMPS