Lingxiao pump, 56WUA400-ii, SMTD1500, ePack, Spa Control & Heater System Complete with pump, heater, and control, spa pack, hot tub heater, spa heater, spa motor

Includes:

1 of p/n SMTD1500 (spa control with heater)
1 of p/n 56WUA400-ii (2 speed pump 12a 230v)

SMTD1500P23012LX from Spa Parts And More. 230V pump so you MUST have 230v available.

ePack Spa Control & Heater System Complete with 12 amp 56 frame 230v pump, heater, and control, 230 volt, 4000 watts, ETL Listed for continuous use in spas & hot tubs, and big 56 frame 2-speed 12 amp 230 volt pump, 4.0kw heater with time, and temperature control, programmable, convertible system, for 4-wire 230 volts with a Neutral. Shown with 2" plumbing fittings. SMTD1500, ePack

A very reliable system, the SmarTouch ePack SMTD1500 Digital Control has been used for years in the spa industry and has a great reputation for reliability. A nice system for portable spas, and hot tubs. Refurbish your tub.

The system is very flexible and easy to program, can be set to a temperature and programmed to run certain hours, or economy mode, etc. using the digital display keypad. Overall height about 12".

Run on 230 volts, this would draw about 30 amps and belongs on a 4-wire circuit WITH A NEUTRAL, on 50a GFCI breaker. Topside keypad/display has a 58" cable and measures 2.5x5.5"

This is a very good basic 2-speed system to refurbish your portable spa, includes set of power cords, owners manual, and topside display.

E Series refers to our Spa Packs featuring the ePack by ACC, combined with matched spa pumps.

Includes:

-Spa Control System with High Flow Heater
-Digital keypad/display 2.5x5.5"
-Power cord set
-2 speed 230v 56 frame Pump
-Fittings for 2" pvc piping connection (easily bushed down to 1-1/2" pipe size, order p/n 4214070)

Options:

- Reducers for fitting 1-1/2" PVC pipe, order here: Reducer Bushings for 1-1/2" pipe

- Optional shutoff valves, order 2 of them here: 2" Gate Valve

- Optional Topside Display/Keypad extension cable, order here: 10 feet long extension

- Upgrade small KP-1000 Topside to larger KP-2010 Topside order here: Small to Large Option

Specifications:

-230 volts 4-wire with NEUTRAL.
-heater specs 240v 4000 watts, high flow, 20GPM minimum
-pump specs Energy Efficient 230v 12 amps, 2760 watts
-plumbing size 2" pvc schedule 40.
-rough in dimensions 26L x 16W x 12"T
-topside keypad/display 2.50 x 5.50" (for flush mount, drops into 1.9x4.9" cutout)
-elevation, to be mounted below water level, for priming.
-weather resistance, this is rated for use under the skirt of a portable spa.
-from the factory, incoming power is set to 4-wire 230 volts with neutral. Tell us if you want that changed,
otherwise it ships to you set for 4-wire 230v incoming.

Note on pump sizing, real, true output is always measured by volts x amps = watts. Spa makers apply horsepower stickers that often overstate true output, like putting 7hp stickers on a 4hp motor, so always looks at volts and amps to know what you are ordering.