Spa Control & Heater System Complete with pump, heater, and control, spa pack, hot tub heater, spa heater, spa motor, baptistry heater,

E Series Spa Pack

The SMTD1500P11514 includes:

SMTD1500 ePack control system complete (1)
400-5570 Pump Unions UN-P20 (2)
2 speed spa pump 115v 13.5a (1)

Spa Control & Heater System Complete with pump, heater, and control, 230 volt or 115 volt, 4000 watts or 1000 watts, ETL Listed for continuous use in spas & hot tubs, 2-speed 13.5a 115v Energy Efficient pump, 4.0kw heater with time, and temperature control, programmable, convertible system, 115 volt OR 230 volts, shown with 2" plumbing fittings.

A very reliable system, the SmarTouch ePack SMTD1500 Digital Control has been used for years in the spa industry and has a great reputation for reliability. A nice system for portable spas, hot tubs, and baptistry use.

The system is very flexible and easy to program, can be set to a temperature and programmed to run certain hours, or economy mode, etc. using the digital display keypad. Overall height about 12".

If run on 230 volts, this would draw about 32 amps and belongs on a 4-wire circuit WITH A NEUTRAL, on 40a GFCI breaker. On 115v it would draw only 14 amps and belongs on a 20a GFCI breaker. Other larger pumps are available too (at additional cost). Topside keypad/display has a 58" cable and measures 2.5x5.5"

This is a very good basic 2-speed system to refurbish your portable spa, includes set of power cords, owners manual, and topside display.

Includes:

-Spa Control System with High Flow Heater
-Digital keypad/display 2.5x5.5"
-Power cord set
-2 speed Pump
-Fittings for 2" pvc piping connection (easily bushed down to 1-1/2" pipe size, order p/n 4214070)

Options:

- Reducers for fitting 1-1/2" PVC pipe, order here: Reducer Bushings for 1-1/2" pipe

- Optional shutoff valves, order 2 of them here: 2" Slice Valve

- Optional Topside Display/Keypad extension cable, order here: 10 foot long extension

- Upgrade small KP-1000 Topside to larger KP-2010 Topside order here: Small to Large Option

Specifications:

-230 volts 4-wire with NEUTRAL, 40 amps, OR, 115 volts 20 amps operation.
-heater specs 240/115v 4000 watts/1000 watts, high flow, 20GPM minimum
-pump specs Energy Efficient 115v 13.5-13.8 amps, 1560 watts
-plumbing size 2" pvc schedule 40.
-rough in dimensions 26L x 16W x 12"T
-topside keypad/display 2.50 x 5.50" (for flush mount, drops into 1.9x4.9" cutout)
-elevation, to be mounted below water level, for priming.
-weather resistance, this is rated for use under the skirt of a portable spa.
-from the factory, incoming power is set to 4-wire 230 volts with neutral. Leave
us a note in the order comments if you want that changed,
otherwise it ships to you set for 4-wire 230v incoming.

Note on pump sizing, real, true output is always measured by volts x amps = watts. Spa makers apply horsepower stickers that often overstate true output, like putting 2hp stickers on a 1hp motor, so always looks at volts and amps to know what you are ordering.