Spa Heater Element for Flothru Spa Heaters 5kw, 624502, SPACOMP 05, SPACOMP05, B24050, ZTSM, 240V, 5000W

624502 Spa Heater Element for Flothru Spa Heaters 240v 5kw 9.9" overall length Incoloy 800 sheath material for excellent corrosion resistance, comes with hardware, and includes installation instructions. Stainless Steel bulkhead fittings are epoxy potted. SS clips prevent noise due to vibration. Fits nearly all spa heaters the are the flo-thru type, with 1-1/4" terminal spacing. SS terminal studs. 240 volts.

Compatible with Balboa M7 heaters.

Fits B24050 heaters. Fits B24050ZT, B24050ZT2, B24050B2, and any of the B24050 series heaters. An excellent choice to replace Balboa 58083 heater elements.

The 5000 watt element is an excellent choice when repairing 5.5kW heaters, as it draws 10% less current, which is easier on relays, and gets just as hot as any 5500 watt element, and it also tends to last longer.

May be used on 120 volts, 240V, 5000W, 624502, 624509, SPACOMP 05, SPACOMP05, fits for 58083, VS501Z, and many others.

Please be very careful on startup procedure, do NOT put
power to the heater until after the pump has run a good
10 minutes or more on high so all air is out of the system!! In other
words, do not turn up the temperature until you run the pump
10 mins on high speed by pressing the jets button.

Best spa heating element, best spa heater element.

Please be very careful on startup procedure, do NOT putpower to the heater until after the pump has run a good10 minutes or more on high so all air is out of the system!! In otherwords, do not turn up the temperature until you run the pump10 mins on high speed by pressing the jets button.

Please be very careful on startup procedure, do NOT put
power to the heater until after the pump has run a good
10 minutes or more on high so all air is out of the system!! In other
words, do not turn up the temperature until you run the pump
10 mins on high speed by pressing the jets button.