 |
372-1621-H, Motor, 12.0/4.4 amp 230 volt 2-speed 56 frame, by Waterway, a great replacement for U.S Motors TT-505, TT505, 1110014, and numerous Emerson, A.O. Smith, Century, and Magnetek motors. 1081/1563
Spa Pump Motor 2 speed 230 volt 12.0/4.4 amps 56 frame 6.5 inch diameter.
Replaces A.O. Smith Century or US Motors motor MTRAOS-187563 TT505 , fits PUUM series pumps, Coleman Spas, MAAX Spas and others. MTRAOS-193767 MTRAOS-187563, 7-187563-02. R63MWENA-4727, TT505, E536254
Approximate overall length 11", height 9", width 6-1/2" , with industry standard 4x6.5" base, 3x5" bolt pattern. A.O. Smith B235, labelled 4.0 HP, often marked by spa manufacturers as 6.0 BHP, which is the maximum brake horsepower it can produce. MTRAOS-187563, Waterway p/n 3721621-1, 187563. A good replacement for the old GE motor # 5kcp49wn9070x
PLEASE NOTE ON WIRING: we do not know what color wire your spa control uses for high speed and low speed. The photo shows locations indicated by your motor diagram on the label, on the side of your motor, and is for your reference only. We are not suggesting black for high or black for low, this is not determined by the motor, it is designated by your control. If red was high speed for you in the past, it is still the high speed wire now. Some controls use black for high, some brands use red.
If in doubt, call the manufacturer of your control, or use a voltmeter to determine.,
Note, this is a bare motor exactly as shown, no water pump included.
|
|
|